|
本帖最后由 MarkZuckerberg 于 2012-6-3 11:19 编辑
[ol][root@server ~]# smartctl -a /dev/sdasmartctl version 5.38 [x86_64-redhat-linux-gnu] Copyright (C) 2002-8 Bruce AllenHome page is ttp://smartmontools.sourceforge.net/=== START OF INFORMATION SECTION ===Device Model: ST1000DM003-9YN162Serial Number: W1D0WRTTFirmware Version: CC4DUser Capacity: 1,000,204,886,016 bytesDevice is: Not in smartctl database [for details use: -P showall]ATA Version is: 8ATA Standard is: ATA-8-ACS revision 4Local Time is: Sun Jun 3 05:19:46 2012 CESTSMART support is: Available - device has SMART capability.SMART support is: Enabled=== START OF READ SMART DATA SECTION ===SMART overall-health self-assessment test result: PASSEDGeneral SMART Values:Offline data collection status: (0x00) Offline data collection activity was never started. Auto Offline Data Collection: Disabled.Self-test execution status: ( 0) The previous self-test routine completed without error or no self-test has ever been run.Total time to complete Offline data collection: ( 575) seconds.Offline data collectioncapabilities: (0x73) SMART execute Offline immediate. Auto Offline data collection on/off support. Suspend Offline collection upon new command. No Offline surface scan supported. Self-test supported. Conveyance Self-test supported. Selective Self-test supported.SMART capabilities: (0x0003) Saves SMART data before entering power-saving mode. Supports SMART auto save timer.Error logging capability: (0x01) Error logging supported. General Purpose Logging supported.Short self-test routine recommended polling time: ( 1) minutes.Extended self-test routinerecommended polling time: ( 115) minutes.Conveyance self-test routinerecommended polling time: ( 2) minutes.SCT capabilities: (0x3085) SCT Status supported.SMART Attributes Data Structure revision number: 10Vendor Specific SMART Attributes with Thresholds:ID# ATTRIBUTE_NAME FLAG VALUE WORST THRESH TYPE UPDATED WHEN_FAILED RAW_VALUE 1 Raw_Read_Error_Rate 0x000f 113 099 006 Pre-fail Always - 54427552 3 Spin_Up_Time 0x0003 097 097 000 Pre-fail Always - 0 4 Start_Stop_Count 0x0032 100 100 020 Old_age Always - 24 5 Reallocated_Sector_Ct 0x0033 100 100 036 Pre-fail Always - 0 7 Seek_Error_Rate 0x000f 100 253 030 Pre-fail Always - 312202 9 Power_On_Hours 0x0032 100 100 000 Old_age Always - 53 10 Spin_Retry_Count 0x0013 100 100 097 Pre-fail Always - 0 12 Power_Cycle_Count 0x0032 100 100 020 Old_age Always - 24183 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0184 Unknown_Attribute 0x0032 100 100 099 Old_age Always - 0187 Reported_Uncorrect 0x0032 100 100 000 Old_age Always - 0188 Unknown_Attribute 0x0032 100 100 000 Old_age Always - 0189 High_Fly_Writes 0x003a 100 100 000 Old_age Always - 0190 Airflow_Temperature_Cel 0x0022 062 048 045 Old_age Always - 38 (Lifetime Min/Max 34/40)191 G-Sense_Error_Rate 0x0032 100 100 000 Old_age Always - 0192 Power-Off_Retract_Count 0x0032 100 100 000 Old_age Always - 23193 Load_Cycle_Count 0x0032 100 100 000 Old_age Always - 51194 Temperature_Celsius 0x0022 038 052 000 Old_age Always - 38 (0 26 0 0)197 Current_Pending_Sector 0x0012 100 100 000 Old_age Always - 0198 Offline_Uncorrectable 0x0010 100 100 000 Old_age Offline - 0199 UDMA_CRC_Error_Count 0x003e 200 200 000 Old_age Always - 0240 Head_Flying_Hours 0x0000 100 253 000 Old_age Offline - 69788923592748241 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 73669293185242 Unknown_Attribute 0x0000 100 253 000 Old_age Offline - 186694490553SMART Error Log Version: 1No Errors LoggedSMART Self-test log structure revision number 1Num Test_Description Status Remaining LifeTime(hours) LBA_of_first_error# 1 Short offline Completed without error 00% 14 -# 2 Short offline Completed without error 00% 8 -# 3 Short offline Completed without error 00% 8 -# 4 Short offline Completed without error 00% 7 -# 5 Short offline Completed without error 00% 0 -SMART Selective self-test log data structure revision number 1 SPAN MIN_LBA MAX_LBA CURRENT_TEST_STATUS 1 0 0 Not_testing 2 0 0 Not_testing 3 0 0 Not_testing 4 0 0 Not_testing 5 0 0 Not_testingSelective self-test flags (0x0): After scanning selected spans, do NOT read-scan remainder of disk.If Selective self-test is pending on power-up, resume after 0 minute delay.[/ol]复制代码怎么这么慢? |
|