请问budgetvm送的另外一个ip要怎么才能使用?

mengxuan123

请问budgetvm送的另外一个ip要怎么才能使用?
我的意思是说,如果我想要做2个网站,分别用不同的ip地址,要怎么才能实现?

目前是主ip能ping通也能正常打开网站,送的ip地址ping不通,有谁知道吗?谢谢!

小夜

如果你装的LNMP，根本不用管，你解析哪个IP都行。

mengxuan123

我装的是amh,可是送的ip它ping不通啊!

图王

找技术

a1328788808

俩ip都可以ping通啊

mengxuan123

刚才用工具ping,发现只有海外,台湾,香港能ping通,国内一律不通,请问是怎么了啊?

zsl198854

送我的5个IP，一直不知道怎么用。。。   

zsl198854

送我的5个IP，一直不知道怎么用。。。   

斜阳晚暮

被墙了呗。还能怎么样。

sunzetu

斜阳晚暮 发表于 2016-5-30 16:20

被墙了呗。还能怎么样。
原来这就是所谓的被墙啊!Hello,

You have had this IP for 10 days now, and it's in the same range as xx.xx.xx.xx

I see this pinging fine from my side and off the network.Can you please provide an MTR report containing at least 300 pings from your location to IP xx.xx.xx.xxx?
For your reference, I've included a guide to generating an MTR report in various operating systems below.

When testing the connection from you to your server, use your server's IP address as the target IP address.

Windows:
1. Download WinMTR from http://winmtr.net/download-winmtr/
2. Extract the downloaded ZIP file.
3. Enter the created WinMTR directory.
4. Enter the WinMTR_x32 directory.
5. Doubleclick WinMTR
6. In the "Host" field, enter the target IP address.
7. Click Start.
8. Allow the program to process for at least five minutes (which should be 300 pings).
9. Click Stop.
10. Click "Copy Text to clipboard."
11. Paste (ctrl+v or right-click > paste) the generated MTR report into this ticket.

Mac:
1. Download mtr from http://rudix.org/packages/mtr.html .
2. Install MTR (Open the .PKG file and proceed through the prompts).
3. Open a Terminal (Applications > Utilities > Terminal)
4. Enter the following command then press enter: sudo /usr/local/sbin/mtr -r -c 300 target_IP_address
5. You will be prompted for your password. Type your password and press enter.
6. Once your password has been accepted, the MTR begins running. This will take around five minutes. Please note that there will not be any output generated until MTR has finished running.
7. Copy and paste the generated output into this ticket.

Linux:
1. Login as root.
2. If it's not already installed, install MTR. (MTR is included in most distribution's repositories. For Debian-based systems (including Ubuntu), run "apt-get install -y mtr". For Red Hat-based systems (including CentOS), run "yum install -y mtr".
4. Run the following command: mtr -r -c 300 target_IP_address
MTR begins running. This will take around five minutes. Please note that there will not be any output generated until MTR has finished running.
5. Copy and paste the generated output into this ticket.


-----------------------
Kind Regards,
Alexander A
BudgetVM Support



我请求换一个ip,但是收到这样的答复,请问这个要怎么破啊?